1. Manuals
  2. Brands
  3. Kaon Manuals
  4. Receiver
  5. KVR-1000
  6. Manual

Kaon KVR-1000 Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Enlarged version
Greetings
Thank you for purchasing our product, and welcome to Kaonmedia, a
leading manufacturer.
We manufacture a product that will satisfy you, and hope that our product
will enhance your life. We provide a product of the best quality and
functionality.
This manual is to help you use the product.
Before operating the product, please read the entire manual thoroughly,
and retain it for future reference. Thank you.
1
Copyright, Authentication, Disclaimer,
Product A/S, User/Master password
Copyright
This manual is protected under the copyright laws of the Republic of
Korea. Reproduction or use of any or all the contents in this manual
without the express written permission of Kaonmedia Co.,Ltd. is forbidden.
The use of the contents in whole or in part without such permission will
result in prosecution.
Authentication
CE, FCC, EMI
Disclaimer
The manufacturers, importers and agents do not accept liability of any
kind for damages caused by accidental injury or inappropriate use and
operation of the product.
The information in this manual is based on current product specifications.
The manufacturer, Kaonmedia Co., Ltd. is constantly updating it with
new functions, and will continue to adopt new technology. All
specifications are subject to change without prior notice.
Product A/S
This product may receive after-sales service. Users can refer to the A/S
information on the company's website (http://www.kaonmedia.com). If the
Internet is not available, contact a service center or agent in your area.
User/Master Password
The default user password of this product is set to 0000.
The Master Password for this product is set to RGYB (Red button +
Green button + Yellow button + Blue button).
1
2
3
4
5
6
7
?
2

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the KVR-1000 and is the answer not in the manual?

Questions and answers

Related Manuals for Kaon KVR-1000

Summary of Contents for Kaon KVR-1000

  • Page 1 Copyright, Authentication, Disclaimer, Greetings Product A/S, User/Master password Thank you for purchasing our product, and welcome to Kaonmedia, a leading manufacturer. Copyright We manufacture a product that will satisfy you, and hope that our product This manual is protected under the copyright laws of the Republic of will enhance your life.

  • Page 2: Cautions

    Cautions Read this manual carefully before using the product. The cautions described The product must not be exposed to water or liquid. If the apparatus is exposed to drips or splashes, it might cause a problem that cannot be below contain important information about safety, and are categorized into: repaired.

  • Page 3: Table Of Contents

    Contents Greetings ..................1 6. DivX & Slide Show Guide ............71 Copyright, Authentication, Disclaimer, 6.1 DivX ....................71 6.2 Slide show ..................72 Product A/S, User/Master password.........2 Cautions..................3 7. RMCS GUIDE (Option) ............73 Contents..................4 7.1 Receiver Installation ...............73 7.2 RMCS Searcher................74 1. Overview .................7 7.3 Admin Mode..................77 1.1 Introduction ..................7 7.4 RMCS Viewer (Web Application)............84...

  • Page 4: Overview

    Overview 1.2 Product Features 1.1 Introduction • 2 LNB Input (F-type), IF 2 RF signal loop through • 2 Tuners for zapping while recording This product is a satellite receiver manufactured by Kaonmedia Co.,Ltd. It provides • PIP (Picture in Picture) various functions and a user-oriented interface to allow it to be used with safety and •...

  • Page 5: Functions And Installation

    Functions and Installation Dual PVR • 3D Graphic User Interface by 16bit Color 2.1 Remote Control Unit • Multi Channel (up to 6 Channels) Record and 1 Channel Playback simultaneously • Dual Decoding for Two Live Streams, or One Live Stream & One Recorded Stream Button Functions •...

  • Page 6: Front Panel

    2.2 Front Panel RECALL To return to the previous channel. To display the TV/Radio program guide. SLEEP To select a present time interval for automatic shut off. DISPLAY To open the Display screen of the System Setting menu. To arrange programs in satellite order. PAUSE To pause the current screen To turn the PIP screen on/off.
  • Page 7 VFD Information (Option) LED Display Information Lamp Color Contents Lamp is “ON” when the power is off Lamp is “OFF” when the power is on GREEN Lamp is “ON” when it shows Signal Locked Lamp is “OFF” when it shows Signal Unlocked Signal Check is subjected to only on the Main Video Tuner YELLOW Lamp is “ON”...

  • Page 8: Rear Panel

    2.3 Rear Panel 2.4 Connecting and Installation How to connect the receiver to various other systems There are several ways of connecting the receiver to your TV, VCR and/or Hi-Fi SYSTEM. Consult your local supplier for assistance in setting-up your system that is best suited to your requirements.
  • Page 9 5. Loop Through TV with Terrestrial Antenna If you have another analogue or digital receiver and you wish to use the same LNB then you can connect it via the loop through. Connect one end of the coaxial cable to the Loop Through on the receiver and connect the other end to the LNB IN on your second receiver.
  • Page 10 Connecting to the PC TV with Motorized System (DiSEqC 1.2) Turn the receiver and your PC on. Connect the receiver to your PC with the enclosed USB cable. Connect one end of RCA/Cinch cable to the RCA/Cinch jack on the back of the Connect it using USB connections in the PVR.

  • Page 11: Basic Operation

    Basic Operation When GMT is selected. 3.1 Quick Start Press the LEFT/RIGHT button to select the current time zone from standard time and then press the OK Start System button. When you press the LEFT/RIGHT button, the Before you watch the television or radio program, you must perform the installation time zone will move by 30 minutes.

  • Page 12: Basic Function Usage

    3.2 Basic Function Usage Channel-Information Banner During “Channel Banner” is appearing, when you Program Information press INFO(BLUE) Button, you can get After the television channels have been programmed, “Channel-Information Banner”. you will see the information box each time you Using “Channel-Information Banner”, you can change the channels.
  • Page 13 Simple Channel List To change the audio output When you press the OK button during receiving Press the A.L/R button on the remote control unit service stream, you can get “Channel List” view. to change the output. Using the UP/DOWN button in “Channel List” Then on-screen menu is displayed on the top view, you can choose another channel.
  • Page 14 Recall List Tuner Change Recall List is to show the previous channels (up to 10 With this function, you can change the Tuner while channels). you are watching TV. Tuner change cannot be done while PIP is in use. If you press the RECALL on the screen, the If you press the TUNER/SWAP button while you are Recall List Pop-up window will appear.

  • Page 15: Main Menu Guide

    Main Menu Guide File Playback With this function, you can play recorded files. Press the MENU button on the remote control unit. You will see the “Main Menu” on the screen. If you press the MODE/FILE button while watching TV, the File List screen will appear. The You can move into the desired submenu using the currently saved directory in the HDD will be LEFT/RIGHT buttons.

  • Page 16: Installation

    4.1 Installation Copy from Tuner 2 to Tuner 1 Use when you copy channels in Tuner 2 to Tuner 1. Basic Setting Press the OK button to copy channels in Tuner 2 to Tuner 1. Press the UP/DOWN button to select the desired item on the basic setting screen. Channel Search If you want to search the channel, press the OK button to move to the channel search setting screen.
  • Page 17 None, DiSEqC Switch Scan Press the RED button on the TP list. Pop up window will be displayed on the screen. Satellite • Frequency: Input a proper Frequency using the Select the satellite you want using the UP/DOWN NUMERIC buttons. buttons on the satellite list.
  • Page 18 DiSEqC 1.2 C-LNB Freq.: When selecting the C/KU Switch is selected as “None”, the C-LNB Freq will be dimmed Satellite automatically. Select the satellite list you want using the UP/DOWN Press the OK button, and then the C-LNB Freq. list buttons on the satellite list.
  • Page 19 Scan Tone Burst: Depending on the user’s antenna switch Press the RED button on the TP list. box. (“off”, “SAT A” or “SAT B”) Pop up window will be displayed on the screen. • Frequency: Input a proper Frequency using the NUMERIC buttons.
  • Page 20 USALS Scan Press the RED button on the TP list. Pop up window will be displayed on the screen. Satellite • Frequency: Input a proper Frequency using the Select the satellite list you want using the UP/DOWN NUMERIC buttons. buttons on the satellite list. •...

  • Page 21: Edit Channel List

    4.2 Edit Channel List Press the BLUE button to set Drive(Fine Drive or Normal Drive) to run the motor. From these menus, you can create favorite lists, lock, skip, delete, or move channel. - Fine Drive/Normal Drive: To move the motor, press the LEFT/RIGHT button.
  • Page 22 Move Favorite 1 ~ 32 • To rename the Favorite channel, You can change the position of the channel you You can edit favorite TV and Radio list. This press the INFO want on the TV/Radio/All channel lists. enables you to create the 32 favorite TV and (BLUE) button.

  • Page 23: Program Guide

    4.3 Program Guide EPG Information To view the Program Guide, press the EPG The program guide provides information such as the program listings and ending times button on the remote control unit. The EPG for all available programs. information will be displayed on the bottom of the Select “Program Guide”...

  • Page 24: Pvr

    Group Play 4.4 PVR Move to the directory where the file for Group Press the LEFT/RIGHT button on the Main Menu to select the PVR and then press the Play is located. OK button. Press the UP/DOWN button on the Directory Press the UP/DOWN button on the PVR menu to select the desired item.
  • Page 25 Sort Timer If you press the GREEN button on the File List With this function, you can set reserved recording screen, the File Sort pop-up window will appear. functions including adding, changing and deleting reserved recordings. Press the UP/DOWN button to select the You can add a reserved recording.

  • Page 26: System Setting

    To format the HDD, press the UP/DOWN button on the PVR menu to select Format HDD and • To change the reserved recording, select reserved record- then press the OK button. ing on the Timer screen and then press the OK button. When the Edit screen appears, change the reserved When the format confirmation pop-up window recording in the same way as you did with adding.
  • Page 27 Audio Language Local Time/GMT In this menu, you can change default language for Select the time setting type. audio when changing services. Press the LEFT/RIGHT button to select either Local Use the UP/DOWN buttons to move to language you Time or GMT and then press the DOWN button to want and then press the OK button.
  • Page 28 Lock Control Display Press the UP/DOWN button on the Set list to Press the UP/DOWN button on the Setup list to select Lock Control and then press the OK select Display and press the OK button. button. Press the UP/DOWN button to select either Screen Type, Menu Transparency, SCART Press the UP/DOWN button to select either Menu Lock, Parental Lock, Receiver Lock or Change...
  • Page 29 S/PDIF Output RF Mode You can hear digital audio of the Dolby 5.1 channel You can select the RF Mode. If you get picture but no using S/PDIF Output. sound, the RF Mode selecting might be wrong. Select an RF Mode and then press the OK button. If selecting OFF, the digital audio will not be output.
  • Page 30 RMCS Usage • If the HDD size is 10 GB, the time available for sav- With this function, you can connect the receiver ing recordings is as follows; remotely to the Ethernet. Decide whether or not to Standard: 20 hours recorded at 140Kbps. High: 9 hours recorded at 300Kbps.
  • Page 31 DVR Video Type • If you select “ON”, Recording Duration, Sensor Type With this function, you can set the Video Data Type. will appear on the pop-up menu. There are two options; PAL and NTSC Press the UP/DOWN button to select the desired Press the UP/DOWN button to select the desired items.

  • Page 32: Utility

    4.6 Utility Zoom Select “Zoom” in the Utility menu with the UP/DOWN buttons and press the OK button, the white frame will Game appear. Press the OK button to move to the GAME folder of • Select the size and position of video you want to the File List.

  • Page 33: Common Interface

    4.7 Common Interface CAM (Conditional Access Module) and Smart Card The menus are provided by the CA module and its smart card. [Caution] Your receiver is equipped with two slots of Common Interface(CI), accepting both Type Please do not plug in the main power supply cord 1 and Type 2 PCMCIA modules(see diagram below.).

  • Page 34: Record File Guide

    Record File Guide Analog PVR/DVR Recording Please refer to [4. Main Menu Guide - 4.5 System 5.1 Recording Setting - 8. Analog PVR/DVR Option] for more details on Analog PVR and DVR recording setting. General Recording Press the RECORD button to record the current broadcast program.

  • Page 35: Slow-Motion

    5.5 Slow-Motion 5.8 Event Notification Function [While DVR recording] The Slow-Motion function can be used to PLAY at a slower speed. Pressing the SLOW MOTION button will play the screen at a slower speed. If the button is pressed again, the screen will play at an even slower speed.

  • Page 36: Divx & Slide Show Guide

    DivX & Slide Show Guide 6.1 DivX 6.2 Slide show You can see the DivX format file of the PC on the settop You can see each Image File one by one. box. Copy Image Files (JPG, BMP) from the PC using USB.

  • Page 37: Rmcs Guide (Option)

    RMCS GUIDE (Option) 7.2 RMCS Searcher RMCS (Remote Monitoring Control System) is software that can control the receiver The RMCS Searcher provided in the CD displays the specific MAC address with remotely via the Ethernet. searching the receiver in the local network. In addition, it allows you to set general If you want to use the RMCS function you have to set it on the menu.
  • Page 38 RMCS Searcher Execution • If a specific port is closed due to a firewall the MAC address might not be displayed. In case the MAC Connect the receiver to the power source and address is not displayed due to a firewall or individ- execute the RMCS Searcher after the PC and the ual firewall program, open the setting data transmis- receiver have been connected to the same...

  • Page 39: Admin Mode

    7.3 Admin Mode Web Admin Mode If you want to execute Web Admin Mode, you should connect to the receiver via Using Admin Mode, you can set general settings such as the network and video. If the Internet Explorer. To do this the network configuration has to have been completed admin PC and the receiver are on the same network, when the RMCS Searcher is already.
  • Page 40 Items Descriptions Network Setting Upgrade Port If you click the Network tab in Properties in Admin Mode the following screen will Sets the port to which upgrade data will be transmitted. Port setting is used for the various network configurations including avoiding a firewall-built in appear.
  • Page 41 Sensor Setting Video Setting If you click the Sensor tab in Properties in Admin Mode the following screen will If you click the Video tab in Properties in Admin Mode the following screen will appear. It helps you to set the sensor operation, and the port for the Sensor and appear.

  • Page 42: Rmcs Viewer (Web Application)

    7.4 RMCS Viewer (Web Application) User Setting If you click the User tab in Properties in Admin Mode the following screen will When you connect to the receiver via Internet Explorer (enter the address previously appear. It helps you to set the receiver user ID and password, and the admin set on Internet Explorer) the RMCS Viewer will be executed as in the following picture.
  • Page 43 RMCS Viewer Function Button Playing Motion Images If you click the Play button the file Button Descriptions path selection window will appear as follows. The default setting for the file Changes the resolution and screen size to 160x120. path is C:\Program Files\Samsung Network Video Server.
  • Page 44 Web Admin Mode Web Admin Mode Function Button If you click Admin Mode on the RMCS Viewer, you can move to the Admin Mode page as follows. Refer to Admin Mode in RMCS Searcher for more details. Buttons Descriptions Upgrades the receiver to the latest firmware. Reboots the receiver.

  • Page 45: Rmcs Viewer (Pc Application)

    Click the Next Button. 7.5 RMCS Viewer (PC Application) Installation is proceeding. CD Installation When the installation is completed, the following screen will appear. When you insert the CD into the CD drive, the InstallShield Wizard Program will be executed automatically and the following screen will appear. Click the Next button.
  • Page 46 Connect this product directly to a PC Target Wizard Connect the product to a PC using a LAN cable. Using the Target Wizard, you can change the RMCS value in the network. The setting value changed using Target Wizard will be stored in the RMCS. Connect this product to a PC via a HUB The connection between the PC and the RMCS has to be made on the same Connect this product to a PC via a HUB using LAN.
  • Page 47 Network Setting If you select Network from among the Target Wizard’s items, the network setting screen will appear as shown below. You can set the overall items related to the network. You should reboot the system to adopt the network setting values into the product.
  • Page 48 Buttons Descriptions User Setting TCP Port Set the port to receive images from the RMCS Viewer. This is used for If you select User from among the Target Wizard’s items, the user information the various network configurations including avoiding a firewall- setting screen will appear as shown below.
  • Page 49 SMTP Setting Video Setting If you select SMTP from among the Target Wizard’s items, the SMTP setting screen If you select Video from among the Target Wizard’s items, the NTP server setting will appear as shown below. screen will appear as shown below. Adjusting the broadcast type and data size transmitted per unit of time will optimize the setting for the network.
  • Page 50 Alarm Setting Network Configuration If you select Alarm from among the Target Wizard’s items, the alarm setting screen When no router is used will appear as shown below. You can send motion images to the administrator’s e- For static IP Users mail when an alarm occurs at the Motion Detection and Sensor.
  • Page 51 For DHCP Users For PPPoE Users If the user doesn’t need an IP provider’s ID and password to connect to the Internet, When the user needs an IP provider’s ID and password to connect to the Internet, this DHCP configuration is used. If you use DHCP, you can connect to this product this PPPoE configuration is used.
  • Page 52 When a router is used When the network environment in which your product is installed needs a router, you can use the product with an internal private network host. The product is then used as a host. Therefore, regardless of the type of external network (static IP, DHCP or PPPoE), you can install the product as if it had internal static IP.
  • Page 53 PPPoE User This is the same as for static users. If connection fails, reboot the ADSL Modem and the system and try again. Click the OK button or the Apply button to apply the settings to the product. It will reboot at this time so you will not be able to log on for about one minute. Close the Target Wizard and connect again a few minutes later.
  • Page 54 Function Buttons RMCS Viewer Using the RMCS Viewer, you can see the image transmitting from the registered Buttons Descriptions RMCS. The RMCS Viewer is divided into 4 parts; the top menu part, the function Record the selected RMCS’s motion image on the screen display. button part, the center screen display and the bottom status display.
  • Page 55 Server Registration and Screen Playback • If you select the registered server and click the Server Registration Modify button, you can correct the contents. • If you select the registered server and click the If you click the Server List button of the RMCS Viewer, Delete button, you can delete the server from the the Server List will appear on the right of the RMCS Server List.
  • Page 56 Buttons Descriptions Media Player If you press the Media Player button from the RMCS Viewer, the Media Player will Search the motion or still image. appear as shown below. Display the screen size 160x120. Display the screen size 320x240. Display the screen size 640x480. Zoom in the screen.
  • Page 57 Motion Image Playback Print Print the current screen of the motion or still image. Press the Open button to select the file to be played. If you press the Open button after selecting the file, the motion image plays on Media Player. Still Image Playback Press the Open button to select the Buttons...

  • Page 58: Troubleshooting

    Troubleshooting Motion Detection An alarm occurs when the motion detection sensor perceives movement in the Problem Solution partially selected area using the Partial Zone Motion Detection function. No display LED on the front panel. Power cord plug in correctly. If you press the Motion Detection button from the RMCS Viewer, the Partial Zone No power supply Motion Detection for the currently operating server will appear.

  • Page 59: Technical Specifications

    Technical Specifications System Resources Tuner Flash Memory 4MBytes FEC Modes Rate 1/2, 2/3, 3/4, 5/6, 7/8 SDRAM 64Mbytes Input Connector F type female (75 Ohm) Main CPU MPEG Chip µPD61130 Frequency Range 950MHz ~ 2150MHz Symbol Rate 2 ~ 45 Mbaud Power Supply Demodulation QPSK...

  • Page 60: Menu Map

    Menu Map Warranty Your product, “the Product”, is warranted by Kaonmedia Co., Ltd. “ the Company“, to be free from defects in materials and workmanship within the following terms and conditions, which are based on the ‘Regulations on Consumer Damage Compensation’ notification of the Ministry of Finance and Economy.
  • Page 61 Product Name Model Name Manufacturing No. Name Date of Purchase Buyer Address Name Name Seller Address Name Web site Kaonmedia Co., Ltd. http://www.kaonmedia .com Manufacturer (Guarantee) Address Warranty Period One (1) year from the date of the purchase Retain period for its Five (5) years from the closing date of the sale accessories or parts...

Table of Contents