Dell PowerEdge 1650 Installation And Troubleshooting Manual page 39

Hide thumbs Also See for PowerEdge 1650:

Table of Contents

CAUTION:

See "Protecting Against Electrostatic Discharge" in the safety instructions in your System Information document.

6. Reseat the ROMB card in its socket (see

See

Figure 6-1

for the location of the ROMB card.

7. Check that the back-up battery power cable is attached to the connector on the ROMB card.

8. Close the system doors, reconnect the system to the electrical outlet, and reboot the system.

If the problem is not resolved, see

Troubleshooting a RAID Controller Expansion Card

Your system may contain an optional RAID controller expansion card. If you encounter problems with the controller, see the card's documentation for

information on troubleshooting.

Back to Contents Page

"Installing a ROMB

Card" in "Installing System Board Options").

"Getting

Help" for instructions on obtaining technical assistance.

Table of Contents

Troubleshooting