Table of Contents
Advertisement
Operation
Overview
The Borrego matrix can be thought of as three matrix switches in
one box. An 8x2/4/8 component video matrix, an 8x2/4/8 standard
def. Composite video matrix, and a 8x2/4/8 stereo analog audio
matrix. By default they are controlled together, but by using the
audio and video commands mentioned below, they can be
controlled separately.
Controlling from the front panel
Shortcut: (In), (#), (Out), (#)
The Borrego matrix switch's front panel uses NeoTouch™
technology. This is different from many other front panels you
have seen with 'membrane' or 'dome' type buttons. The
NeoTouch™ panel senses a human finger touching the acrylic
panel without any moving parts. For you, the user, this means that
you need not press hard to activate a button, a light tap will do.
Powering the Borrego matrix switch on and off is accomplished by
pressing the power button. To prevent accidental power offs, two
button presses are required to shut down the matrix.
The Borrego matrix switch will suggest to you what buttons to
press next by illuminating the LEDs.
In the powered on and ready state, three LEDs will be lit; In,
Audio, and Video.
In – Selecting the In button will begin the process of switching
both audio and video.
7
Borrego Matrix Switch User's Guide (DOC42-00004-D_NeoPro-Borrego.doc)
Advertisement
Table of Contents
