Table of Contents
Advertisement
top of other equipment without causing damage. In either case, to
avoid scratches, never slide equipment on top of one another.
Unpacking
The shipping carton for the Borrego matrix switch will include the
following items:
1 – Borrego Matrix Switch
1 – AC Power cord
1 – 6' USB cable
1- 6' RS-232 cable
1 – User's Guide
1 – CD-ROM driver disc
1 – Pair of rack mount ears with screws
If accessories were ordered, the carton may also contain:
1 – IR remote control
Front Panel Protective Film
There is a clear film over the front panel to protect it during
manufacturing and shipping. Remove this film before using your
Borrego matrix switch.
Inputs
Connecting source devices to the Borrego can be done in any
order. All inputs have the same performance, so organize them as
you see fit. Just be sure to connect the video "Y", "Pb" and "Pr"
signals as labeled on the rear panel.
The connectors labeled "Video" are intended for either composite
standard definition video, or alternatively SPDIF digital audio.
4
Borrego Matrix Switch User's Guide (DOC42-00004-D_NeoPro-Borrego.doc)
Advertisement
Table of Contents
