Cutting Attachment - Stihl HT 56 C Instruction Manual

4
3
Slide the lug (2) on the front drive
N
tube (3) into the slot (4) in the
coupling sleeve as far as stop – if
necessary, turn the front drive
tube (3) back and forth while
pushing it home.
5
6
When correctly installed, the red
line (5) (arrow point) must be flush with
the end of the coupling sleeve.
Tighten down the star knob (6)
N
firmly.
Attach the shoulder strap to the
N
carrying ring.
HT 56 C

Cutting Attachment

2
A cutting attachment consists of the saw
chain, guide bar and chain sprocket.
The cutting attachment that comes
standard is designed to exactly match
the pole pruner.
1
The pitch (t) of the saw chain (1),
–
chain sprocket and the nose
sprocket of the Rollomatic guide bar
must match.
The drive link gauge (2) of the saw
–
chain (1) must match the groove
width of the guide bar (3).
If non-matching components are used,
the cutting attachment may be damaged
beyond repair after a short period of
operation.
2
3
a
Chain Scabbard
The scope of supply includes a bar
scabbard that matches the cutting
attachment.
If guide bars of different lengths are
mounted to the pole pruner, always use
a chain scabbard of the correct length
which covers the complete guide bar.
The length of the matching guide bars is
marked on the side of the chain
scabbard.
English
11