Storage During Non-Use; Troubleshooting - Silvercrest SDM 1000 A1 User Manual And Service Information

Do not use any solvents to clean the doughnut maker (A). This will prevent damaging the Donut
Maker (A) and cleaning residue in the next batch of donuts. Proceed as follows:

After using the Donut Maker (A) first clean the baking surfaces (6) and donut moulds (7) with a
dry paper towel to remove grease residue.

Clean all surfaces, the power cable and the housing with washing-up liquid and water for
rinsing.

Next, use a new, clean cloth to remove the residue of washing-up liquid.

Dry the Donut Maker (A) well before using again.

Storage during non-use

When the Donut Maker (A) is
not being used it can easily
be stored by wrapping the
power cord around the rear
foot and storing the Donut
Maker (A) vertically to save
space. Use the latch (5) to
secure the cover (3) from
opening when you want to
store the doughnut maker (A).

Troubleshooting

The Donut Maker (A) is not working.

Verify the plug is corrected connected to the mains socket.

Check if the socket being used is live. Try plugging the Donut Maker (A) into a different socket.
Batter leaks from the sides of the Donut Maker (A).

Add less batter to the donut moulds (7). The expansion varies by the batter being used.
Donut Maker SDM 1000 A1
English - 9