1
SAFETY INSTRUCTIONS
-
Each person active in the areas where there is danger of falling is responsible for
ensuring that the connection to the anchorage system is kept as short as possible
to prevent the possibility of a fall.
-
Before starting the work, you must ensure that no objects can fall to the ground
from the work site. The area below the work site (sidewalk, etc.) must be kept
clear.
-
Users must ensure that the ground is suited for fixing the anchorage device.
(light dome with or without sealing (see pages 8 and 9), etc.)
-
If uncertainties arise during installation it is imperative that you contact the
manufacturer.
-
Do not make any changes to the approved anchorage device. Should modifica-
tions become absolutely necessary, contact the manufacturer and seek written
approval.
-
Using the system is no longer permitted if damage to the material, the clasps,
the lashing strap, etc. is obvious or defects have been detected during regular
inspections.
-
When used as an anchorage device (harness strap), the restraint system must
be planned in such a way that no one can fall over the edge if the personal protec-
tive equipment is used properly.
(See planning documents at www.innotech.at)
-
When the restraint system is used as an anchorage device (harness strap),
the minimum free space necessary under the edge is:
Manufacturer's specification of the personal safety equipment used including
deflection of the harness + body height + 1m safety margin.
-
Before use, you must visually check the entire restraint system for obvious
defects (e.g. deformations, abrasion, weathering, cracks (harness strap, net
yarn), fray, defective roof sealing, etc.). If there are any doubts concerning the
safe function of the restraint system, it must be inspected by an expert (written
documentation).
-
At least once a year, an expert must check the complete safety device including
the personal protective equipment used. The inspection by an expert must be
documented in the provided test log.
-
After a fall and the resulting strain, you must stop using the restraint system and
have it checked by an expert.
MOBI / Version 1.5 / www.innotech.at
3
Need help?
Do you have a question about the MOBI and is the answer not in the manual?
Questions and answers