Safety Instructions - Innotech MOBI Instruction Manual

1

SAFETY INSTRUCTIONS

Prior to use, the following safety instructions and the current state of the art
must be taken into consideration.
-
Keep this operating manual with the product and carefully fill out the test sheet
(page 13) and the test log (pages 14 and 15).
-
Completely read the instruction manual.
-
Understand and accept the possibilities and restrictions of the restraint system
as well as the risks associated with its use.
-
MOBI should only be installed by specialised / competent experts familiar with
the safety system and in compliance with the current state of the art.
-
You must be familiar with these instructions, as well as with the local safety
regulations as a prerequisite for installing and using the system. You must also
be physically and mentally fit and trained in the use of PPE (Personal Protective
Equipment).
-
Medical conditions (cardiovascular problems, intake of medicines, alcohol, etc.)
can affect the safety of the user.
-
Measures (emergency plan) must be specified for fast rescue prior to using
the fall prevention systems. Attention: after a fall a longer period of suspen-
sion in personal protective equipment can cause severe injuries or even death
(suspension trauma).
-
Adhere to the respective accident prevention regulations (e.g. working in areas
where there is a danger of falling) when using this restraint system.
-
For horizontal use, only those fasteners may be used that are suited for this
purpose and have been tested for the respective edges (sharp edges: sheet with
trapezoidal corrugations, steel girder, concrete, etc.).
Attention: avoid pendulum fall!
-
Make absolutely sure that the anchorage equipment cannot be endangered
by sharp edges.
-
The combination of specific tested and approved components is only permitted
as specified in this instruction manual. Incorrect applications can impair safe
function – this can result in severe or fatal injuries.
-
This restraint system was developed for personal safety and may not be used
for other purposes. Approved applications are only those described herein.
-
Never attach undefined loads to the restraint system.
2
MOBI / Version 1.5 / www.innotech.at