4-1. Selection and Installation of Bracket
A standard bracket is installed on this product. When fixing this product to a PCI slot optimized for
the low profile type, replace the bracket with the attached low profile one. The procedure is as
follows.
Tips
1.
Remove the two screws.
2.
Remove the bracket from this product.
3.
Install the low profile bracket to this product.
4.
Tighten the two screws.
Tips
Notice
Exchange of a bracket uses the minus screwdriver suitable for the size of a screw.
Follow the same procedure when the low profile bracket is replaced with the
standard bracket.
2
3
Make sure to keep the removed bracket carefully.
1
4
- 33 -