Table of Contents
Advertisement
Emulex LightPulse BIOS Utility, WB2.01a2
Copyright (c) 1997-2007 Emulex. All rights reserved.
Emulex Adapters in the System:
1. LPe1150-F4-N:
Enter a Selection: _
Enter <x> to Exit
Tips
4> When the menu is displayed, select the number of the port. Then, you see the information window.
Adapter 01:
LPe1150-F4-N: Mem Base:4000
Port Name: 10000000 C92D4067
Topology: Auto Topology: Loop First (Default)
The BIOS for this adapter is Disable
1. Configure Boot Devices
2. Configure This Adapter's Parameters
Enter a Selection: _
Enter <x> to Exit
<d> to Default Values
5> Transcribe 12 figures of WWPN address which displayed.
Press <ESC> key to return to the menu of select port and go next port.
6> If you have finished to confirm all WWPN addresses, enter "x" (Exit) to reboot the computer.
PCI Bus, Device, Function(07,00,00)
If the above menu is not displayed and the window has gone to the next
one, press <Alt>, <Ctrl> and <Del> keys simultaneously to reboot the
computer. Then, start the steps from the beginning.
The above message sample is just for your reference. Some of them may
be different depending on the computer or its configurations.
PCI Bus, Device, Function(07,00,00)
Firmware Version:WS2.72A2
Node Name: 20000000 C92D4067
WWPN address
<Esc> to Previous Menu
- 41 -
Advertisement
Table of Contents
