Vulcan-Hart ICM24 Service Manual page 8

4. Disconnect the valve from the manifold pipe. (See Fig. 5)
NOTE: It may be necessary to remove heat shield to disconnect the valve.
5. Install new valve using pipe dope and reversing steps 1-4.
REPLACEMENT OF PILOT ADJUSTMENT VALVE
1. Follow steps 1 and 2 under Removal of Burner Valve.
2. Disconnect the compression nut from the pilot tube with
3. Disconnect the pilot valve from the manifold pipe. (Fig. 7)
1
⁄ " wrench. (Fig. 6)
2
Fig. 6
Fig. 7
— 8 —