Download Print this page

Advertisement

Quick Links

Important before assembly:
Read these instructions carefully before assembling or using the product.
■ Please check the contents of the boxes before attempting to assemble this product. The
instructions will have a checklist of parts and fittings.
■ It would be sensible to lay a rug or a carpet on the floor where you intend to assemble the
product, to avoid scratches and damaging the product or the floor.
■ Assemble the product as close to its intended final location/room as possible.
■ Do NOT use any power tools as this may damage the frame.
Health & Safety:
■ This product or some parts of this product will be heavy. Please use an assistant when lifting.
■ DO NOT jump on the product or any of its parts.
■ DO NOT use this product if any parts are missing, damaged or worn.
■ DO NOT use this product unless all fixings are secured.
■ Please keep small parts out of reach of children.
■ Always use on a level, even surface.
Please keep these instructions for future reference.
Assembly Instructions
Divan Beds
(Inc. Build Your Own Bed)
5 mins
Assembly
Feb 2019 - E&OE - V.1

Advertisement

loading

Summary of Contents for Happybeds Divan Bed

  • Page 1 5 mins Assembly Assembly Instructions Divan Beds (Inc. Build Your Own Bed) Important before assembly: Read these instructions carefully before assembling or using the product. ■ Please check the contents of the boxes before attempting to assemble this product. The instructions will have a checklist of parts and fittings.
  • Page 2 Never drag or push the pieces across a hard or stone floor as this will cause damage to the joints. Use a carpet or a rug for extra care. If you have problems assembling or have damaged or missing pieces, please contact us by visiting: https://www.happybeds.co.uk/customer-service...
  • Page 3 Contents Assembly Instructions: For Single Bases (2ft6, 3ft) For Double Bases (4ft, 4ft6) For King & Superking Bases (5ft, 6ft) Feb 2019 - E&OE - V.1 www.happybeds.co.uk...
  • Page 4 5. Carefully flip the base so that it is now resting atop the gliders, firmly pressing down on each of the corners of the base to ensure that it is stable. Feb 2019 - E&OE - V.1 www.happybeds.co.uk...
  • Page 5 Proceed to screw the headboard screws clockwise, leaving enough space for the headboard struts to fit into place. (for the headboard struts fixing, please follow the instructions that came separately with the headboard) Feb 2019 - E&OE - V.1 www.happybeds.co.uk...
  • Page 6 (For Divan Beds with drawers) 11. The drawers are already installed within the Divan Bed base. Strips of fabric keep the drawers in place during transit and will need to be removed to allow access to the drawers. Remove these strips of fabric via pulling, tugging or cutting them off.
  • Page 7 5. Securely insert the eight (8) gliders into the bottom of the bases, each base requires four (4). (Please Note: This may require the use of a blunt tool, such as a rubber mallet) Feb 2019 - E&OE - V.1 www.happybeds.co.uk...
  • Page 8 12. Decide which end the headboard will attach to and pierce the centre of the stickers. (Please Note: This action is irreversible, so please be sure of which end the headboard will attach. DO NOT PIERCE BOTH SIDES!) Feb 2019 - E&OE - V.1 www.happybeds.co.uk...
  • Page 9 15. Be sure to adjust the height of the headboard to allow for the depth of the mattress. Feb 2019 - E&OE - V.1 www.happybeds.co.uk...
  • Page 10 (For Divan Beds with drawers) 16. The drawers are already installed within the Divan Bed base. Strips of fabric keep the drawers in place during transit and will need to be removed to allow access to the drawers. Remove these strips of fabric via pulling, tugging or cutting them off.
  • Page 11 5. Securely insert the eight (8) gliders into the bottom of the bases, each base requires four (4). (Please Note: This may require the use of a blunt tool, such as a rubber mallet) Feb 2019 - E&OE - V.1 www.happybeds.co.uk...
  • Page 12 11. Decide which end the headboard will attach to and pierce the centre of the stickers. (Please Note: This action is irreversible, so please be sure of which end the headboard will attach. DO NOT PIERCE BOTH SIDES!) Feb 2019 - E&OE - V.1 www.happybeds.co.uk...
  • Page 13 14. Be sure to adjust the height of the headboard to allow for the depth of the mattress. Feb 2019 - E&OE - V.1 www.happybeds.co.uk...
  • Page 14 (For Divan Beds with drawers) 15. The drawers are already installed within the Divan Bed base. Strips of fabric keep the drawers in place during transit and will need to be removed to allow access to the drawers. Remove these strips of fabric via pulling, tugging or cutting them off.