Photo Shortcut Menu; Video Setup - Akaso Brave 7 LE User Manual

Photo Shortcut Menu

1. Single Photo
Default setting is Single Photo.
2. Burst Photo: 3 shots/7 shots/15 shots/30 shots
Default setting is 3 shots.
In burst mode, several photographs are captured in quick succession, so it is perfect
for capturing fast-moving activities.
3. Time Lapse
Time Lapse: 3 Sec/5 Sec/10 Sec/30 Sec/1 Min
Time Lapse Duration: Unlimited/5 Min/10 Min/15 Min/20 Min/30 Min/60 Min
Default setting is 3 Sec and Unlimited.
Time Lapse Photo captures a series of photos at specified intervals. Use this mode
to capture photos of any activity, then choose the best ones later.
4. Self-Time: Delay 2s/Delay 5s/Delay 10s
Default setting is Delay 2s.
Self-Time Mode gives a delay between pressing the shutter release and the shutter's
firing.
5. Long Exposure: 1 Sec/2 Sec/5 Sec/8 Sec/30 Sec/60 Sec
Default setting is 1 Sec.
Long exposure means using a long-duration shutter speed to sharply capture the
stationary elements of images while blurring, smearing, or obscuring the moving
elements.

Video Setup

1. Video Resolution: 4K30fps/2.7K60fps/2.7K30fps/1080P120fps/1080P60fps/
1080P30fps/720P240fps/720P120fps/720P60fps
Default setting is 4K30FPS.
Note: When capturing video at high resolutions or high frame rates in warm
ambient temperatures, the camera may become warm and use more power.
09
2. Video Record: Off/On
Default setting is On.
3. Image Stabilization: Off/On
Default setting is Off.
This setting adjusts the footage to offset for motion during capture. The result is
smoother footage, especially in activities with relatively small but fast motion
including cycling, motorcycling, and handheld uses.
Note: Image stabilization cannot be activated when the video resolution is
1080P120fps, 720P240fps and 720P120fps.
4. Video Quality: High/Middle/Low
Default setting is Middle.
5. Wind Noise Reduction: Off/On
Default setting is Off.
Turn on Wind Noise Reduction, it can lower the noise to an acceptable level.
6. Auto Low Light: Off/On
Default setting is Off.
Auto Low Light mode will automatically adjust settings according to lighting
conditions to achieve the best low light performance. Even if you move back and
forth between bright and dark environments, you do not need to manually adjust
the camera settings.
Note: Auto Low Light setting is only applied to the video whose frame rate is 60fps
or above.
10