Quick Reference - SELFSAT SNIPE AIR User Manual

6. Special function 3 : TEST mode
TEST mode can be initialised when either an error message is shown or the antenna is at HOME position.
a. Press MODE once to enter TEST mode and press OK.
b. Go to the available functions on LCD using the arrow buttons and press OK to select.
c. To exit, press MODE and unit will return to previous status.
7. Special function 4 : Ex LAN port
User are able to watch SAT>IP broadcasting channels on IP client or laptop by hard wired connection of LAN
cable to Ex LAN port on the left side of the controller. If Ex LAN port is in use, LAN LED on the right side of
controller will be solid on. (Extra LAN cable is not included in the package.)

3-3. Quick reference

1. Press POWER to turn on the unit and select a satellite using arrow buttons and press OK.
2. Wait until "SAT FOUND" is displayed on LCD and NID check LED(second LED on the left side)
becomes solid.
3. Now, the selected satellite has been locked and the TV channels will be shown on smart
devices and TV.
WARNING
When user physically moves the unit, the unit must be returned to HOME
position to prevent damage.
NOTE
The unit will be automatically folded back to HOME position if vehicle
moves faster than 25km/h when the unit is powered.
ENGLISH - 10