Storage And Maintenance - Shark NV355 Series Owner's Manual

Storage and Maintenance
Quick
Cord Release
Lower Cord
Storage_
STORE YOUR VACUUM SAFELY
1 Convert your vacuum back to upright vac mode.
2 Rotate the upper quick cord release to its upright
position and coil the power cord loosely around
the two clips. Clip the plug onto the cord to
secure. (Fig. 20)
3 Store the dusting brush and the crevice tool on the
mounts on the accessory holder.
4 Store your vacuum cleaner safely in a cool dry
area where it will not be a hazard, will not get
damaged and
will not cause damage to anyone or anything,
NOTE: Empty dust cup after cleaning and prior
to storing, (See "Maintenance" section for
instructions.)
,_ To reduce the risk of electric shock, unplug the unit
before performing any cleaning, maintenance, or
troubleshooting checks.
Reassemble all parts securely before operating
vacuum,
_l_ DO NOT operate the vacuum without the pre-
motor filters and dust cup in place,
DO NOT operate the vacuum with WET filters,
IMPORTANT: Make sure all filters are completely
dry before inserting back into vacuum.
WARNING: Never insert sharp objects into any
opening to clear an obstruction.
IMPORTANT: Damages caused while clearing
or attempting to clear blockages are not covered
under your product's limited warranty.
NV355 NV356E NV356K NV357 NV355CS NV356KCS IB EqJ']_u811 4.indd 13 11-08-11 12:46PM