Memory(Speed) Dialing; Storing Numbers Using Redial; Dialing From Memory; Changing Stored Numbers - VTech VT1940 Instruction Manual

STORING NUMBERS USING REDIAL
To store the last number dialed into a
permanent memory location, do the
following, from the handset:
The handset should be OFF.
Press
(m).
The PHONE LED
will flash quickly to indicate the unit
is in program mode.
STORING NUMBERS
USING REDIAL
THE HANDSET SHOUl
OFF
PRESS
a
THE PHONE LED WlLl
ENTER MEMORY
LOCATION (00-20)
PRESS
a
PRESS
a
LD BE
. FLASI
Enter the memory location (00..20)
you wish to store the number in.
press E ~ ) .
Press MEM to store the number
and exit program mode. The unit
will emit a happy tone (a series of
short beeps) to confirm successful
programming.
If programming is unsuccessful the
unit will generate an error tone.
DIALING FROM MEMORY
press
( m e
or
6 )
to
get dial tone.
press
m.
Enter a 2 digit location number
(00..20)
The number stored in that location
will be automatically dialed.
MEMORY DIALING
PRESS@
@ @ @
PRESS-
@
ENTER MEMORY
@ @
a
LOCATION (00-20)
0 - 0
G 3 - E 3
ri
CHANGING STORED NUMBERS
To change or replace a stored number,
simply store a new number in the
desired memory location following the
instructions listed in STORING
MEMORY DIAL NUMBERS.
DELETING STORED NUMBERS
To delete a stored number from memory
do the followin from the handset:
Press
&
to enter program
mode.
Enter the memory location (00..20).
Press
@
to exit program mode.
DELETING STORE
@ @
ENTER MEMORY
@ @
a
LOCATION (00-20)
I I
Stored numbers are retained in memory
even if the base loses its power or the
handset battery is removed.
STORING SPECIAL CODES
To insert a ause in a phone number,
press
(HOLD)
at the appropriate point
when entering the number. This inserts
a 2 second ause. For longer pauses,
press
&
two or more times. Each
press makes the pause 2 seconds
longer, and is treated as a stored digit.
If your phone is connected to a PBX
you can store the PBX access number
and a pause before the phone number.
For example, to store 9-PAUSE-555-
1234 in memory location 08, do the
following:
Press
fFKZ4
-
Press 08 (memory location)
Press 9
Press
( E )
(pause)
Dial 5551234
Press