Electrical Requirements; Motor Horsepower - KitchenAid KSBC1B2 Manual

Hide thumbs Also See for KSBC1B2:
Table of Contents

Advertisement

Available languages

Available languages

COMMERCIAL BLENDER SAFETY
12. The use of attachments, including canning blender jars, not recommended
by KitchenAid may cause a risk of injury to persons.
13. Do not use appliance for other than intended use.
14. When blending hot liquids or ingredients, Ingredient Cap should remain in place
over the lid opening. Always start on lowest speed and slowly ramp to desired
speed when blending hot liquids or ingredients.
SAVE THESE INSTRUCTIONS

ELECTRICAL REQUIREMENTS

MOTOR HORSEPOWER

Motor horsepower for the blender motor was measured using a dynamometer, a machine
that laboratories routinely use to measure the mechanical power of motors. Our 3.0 peak
horsepower (HP) motor reference reflects the horsepower output of the motor itself and not
the Blender's horsepower output in the blender jar. As with any blender, the power output in
the jar is not the same as the horsepower of the motor itself.
4
This product is designed for commercial use.
Voltage: 120 V
Frequency: 60 HZ
Amps: 15.0 A
NOTE: If the plug does not fit in the
outlet, contact a qualified electrician. Do
not modify the plug in any way. Do not
use an adapter.
Do not use an extension cord. If the
power supply cord is too short, have a
qualified electrician or serviceman install
an outlet near the appliance.

Advertisement

Table of Contents
loading

Table of Contents