Table of Contents
Advertisement
Telephone operation
Temporary tone dialing
If you have pulse (rotary) service only, you can switch from pulse to tone dialing
temporarily during a call. This is useful if you need to send touch-tone signals to
access your telephone banking or long distance services.
1.
During a call, press
2.
Use the dialing keys to enter the number you wish to dial. The telephone
sends touch-tone signals. The telephone automatically returns to pulse dialing
mode after you end the call.
Find handset/headset
This feature helps you find misplaced handsets and
headset.
To start the paging tone:
Press /FIND HANDSET on the telephone base.
•
All idle handsets and headset ring and the handsets
display ** Paging ** and the
flashes in blue.
To end the paging tone:
•
To end the paging tone, press
(0-9, #,
) on the handset, or press
HANDSET on the telephone base.
Press OFF/
•
the handset. Its screen shows Ringer muted and
•
All registered handsets and headsets ring when being paged even if the ringer
volume is set to off.
on the handset.
light on the headset
/
or MUTE/
CANCEL
DELETE
,
/SPEAKER or any dialing key
FLASH
on the headset, or press /FIND
to temporarily turn off the paging tone on
27
.
Advertisement
Table of Contents
