Determining Compatibility Of Tire And Vehicle Load Capacities; Adverse Safety Consequences Of Overloading On Handling And Stopping And On Tires; Steps For Determining Correct Load Limit - Subaru Legacy 2012 User Manual

The total weight now exceeds
3.
the capacity weight by 22 lbs (10
kg), so the cargo weight must be
reduced by 22 lbs (10 kg) or more.
& Determining compatibility of
tire and vehicle load capaci-
ties
The sum of four tires' maximum
load ratings must exceed the max-
imum loaded vehicle weight
("GVWR"). In addition, sum of the
maximum load ratings of two front
tires and of two rear tires must
exceed each axle's maximum
loaded capacity ("GAWR"). Original
equipment tires are designed to
fulfill those conditions.
The maximum loaded vehicle
weight is referred to Gross Vehicle
Weight Rating (GVWR). And each
Consumer information and Reporting safety defects
axle's maximum loaded capacity is
referred to Gross Axle Weight Rat-
ing (GAWR). The GVWR and each
axle's GAWR are shown on the
vehicle certification label affixed to
the driver's door.
The GVWR and front and rear
GAWRs are determined by not only
the maximum load rating of tires but
also loaded capacities of the vehi-
cle's suspension, axles and other
parts of the body.
Therefore, this means that the
vehicle cannot necessarily be
loaded up to the tire's maximum
load rating on the tire sidewall.
& Adverse safety conse-
quences of overloading on
handling and stopping and
on tires
Overloading could affect vehicle
handling, stopping distance, vehicle
and tire as shown in the following.
This could lead to an accident and
possibly result in severe personal
injury.
.
Vehicle stability will deteriorate.
.
Heavy and/or high-mounted
loads could increase the risk of
rollover.
.
Stopping distance will increase.
.
Brakes could overheat and fail.
.
Suspension, bearings, axles and
other parts of the body could break
or experience accelerated wear
that will shorten vehicle life.
.
Tires could fail.
.
Tread separation could occur.
.
Tire could separate from its rim.
& Steps for Determining Cor-
rect Load Limit
Locate the statement "The com-
1.
bined weight of occupants and
cargo should never exceed XXX
kg or XXX lbs." on your vehicle's
placard.
Determine the combined weight
2.
of the driver and passengers that
will be riding in your vehicle.
Subtract the combined weight of
3.
the driver and passengers from
XXX kg or XXX lbs.
– CONTINUED –
13-13