Subaru Legacy 2012 User Manual page 247

5-64
Audio
7. Select the "CONFIRM" menu.
– The phone number is then regis-
tered and "STORED" (type B audio)/
"Phone number stored." (type C audio)
is displayed.
! Registering from call back
1. Select the "CALLBACK" menu.
2. Select the phone number by operating
the "TUNE" dial.
3. Select the "STORE" menu.
4. Select the "CONFIRM" (type B audio)/
"Confirm store number?" (type C audio)
menu.
5. Perform either of the following proce-
dures.
– Select the "RECORD NAME" menu
by operating the "TUNE" dial.
– Press the talk switch
6. Say the name (voice tag) to be
registered.
7. Select the "CONFIRM" menu.
– The phone number is then regis-
tered and "STORED" (type B audio)/
"Phone number stored." (type C audio)
is displayed.
! Registering speed dial
1. After registering phonebook data, per-
form either of the following procedures.
– Select the "SPEED DIAL" menu by
operating the "TUNE" dial.
– Press the talk switch
"SET SPEED DIAL".
2. Press the preset button (from
) to which you want to register the
phone number.
NOTE
If the number to be used is already
registered in speed dial, "OVER-
WRITE?" will be displayed. Select the
"CONFIRM" menu to overwrite, or
select the "GO BACK" menu to cancel.
! List names function
The voice tags registered in the phone-
book are spoken by using the list names
function. To use the list names function,
perform the following procedure.
.
1. Select the "LIST NAMES" menu.
2. Choose the registered data by per-
forming either of the following procedures.
– Press the talk switch
– Operate the "TUNE" dial (type B
audio only).
After "SELECTED" is displayed, you can
choose the following menus.
. "DIAL" to make a phone call
. "CHANGE NAME" to change the name
(voice tag)
. "SET SPD DIAL"/"SET SPEED DIAL"/
"Speed Dial" to set the speed dial
and say
. "DELETE ENTRY" to delete the name
(voice tag) from the phonebook
to
. "GO BACK" to go back to the menu
mode
. "HELP" to listen to the help guidance
(only when using the voice command
system)
NOTE
. After "LIST NAMES" is selected, if
the OFF hook switch
selected number is called.
. After "LIST NAMES" is selected, if
no operation is performed, the mem-
ories are displayed and voice tags are
spoken. After all memories/voice tags
are displayed/spoken, "END OF LIST"
is displayed and the mode changes to
the "PHONE BOOK" menu mode.
! Changing voice tag
1. Select the "PHONE BOOK" menu.
.
2. Select the "CHANGE NAME" menu.
3. Select the phone number by perform-
ing one of the following procedures.
– Operate the "TUNE" dial.
– Press the talk switch
the voice tag.
– Press the talk switch
is pushed, the
and say
, say "List