Table of Contents
Advertisement
18. SETTING OPERATIONS
Press [
] button on the Main menu screen.
The Setting menu screen will be displayed.
General Setup Menu
Clock: Set system clock.
AM/PM: Set AM or PM when current time mode is
12HR mode.
24-Hour Format:Set the time display mode.
Beep: Turn on or turn off the beep confirmation sound.
Bluetooth: Set the Bluetooth ON or OFF.
Wallpaper: Choose the desired wallpaper.
Input Aux Sense: Auxin input switch, including Low,
Mid, High.
Dimmer Mode: Select screen dimmer mode. There
are three options, Day, Night and Auto.
Tel Speaker: There are two options, Left and Right.
For example, if current setting is Left, when BT phone
is coming in, only left speaker can hear the phone.
PANDORA: Set PANDORA On or Off.
TFT Auto Open: There are two options, On and Off.
If current setting is On, the TFT screen will slide out
automatically when the system is power on. If current
setting is Off, the TFT screen will always keep the last
position when the system is power on.
Camera Audio: There are three options, Off ,On
,Mute. When the car is in reverses, if current setting is
Off ,current source will continue play; if current setting
is On ,current source will pause and camera audio will
play; if current setting is Mute , system mute.
Camera Input Format :There are two options, NTSC
and PAL.
Version:Display the software version information.
Note:
• AM/PM and Clock can be adjusted when set the
system time not to be synchronized with GPS local
time.
Video Setup Menu
This menu includes: DVD Wide Screen Mode;
Brightness.
DVD Wide Screen Mode: Set the DVD wide screen
mode on or off.
Brightness: Set brightness value from 0 to 20.
NZ502
27
Advertisement
Table of Contents
