Canon MP560 Series On-Screen Manual page 607

Starting ScanGear (Scanner Driver)
Advanced Guide > >
Scanning
ScanGear (Scanner Driver) > Starting ScanGear (Scanner Driver)
Starting ScanGear (Scanner Driver)
Use ScanGear (scanner driver) to make image corrections and color adjustments when scanning.
ScanGear (scanner driver) can be started from MP Navigator EX or an application.
Note
To scan via a network connection, start ScanGear and set up the network environment before
scanning.
Network Scan Settings
Starting from MP Navigator EX
Navigation Mode Screen
Follow these steps to start ScanGear (scanner driver) from the Navigation Mode screen of MP Navigator
EX.
Start MP Navigator EX and open the Navigation Mode screen.
1.
Starting MP Navigator EX
Point to Scan/Import and click Photos/Documents (Platen).
2.
The Scan/Import window opens.
Select the Use the scanner driver checkbox, then click Open Scanner Driver.
3.
The ScanGear (scanner driver) screen appears.
One-click Mode Screen
Follow these steps to start ScanGear (scanner driver) from the One-click Mode screen of MP Navigator
EX.
Start MP Navigator EX and open the One-click Mode screen.
1.
Scanning with Other Application Software > Scanning with Advanced Settings Using
Stran 607 od 958 strani