Table of Contents
Advertisement
10. If you have the optional flow cell,
assemble the flow cell.
a.
Place the O-ring around the side
port of the flow cell.
b. Insert platinum tube into plastic
fitting.
If you wish, you may also connect the
plastic tubing to the Pt tube, or you
may wait until the plastic fitting is
mounted onto the main block.
Carefully slide the static cell into the
receptacle in the main block.
c.
Slide platinum tube plus plastic
fitting into port on flow cell.
Cell Connections--Quartz Crystal Installation
29
Pt tube
protrudes from
other side as
Advertisement
Table of Contents
