Hoover Vibra brush 5841 Manual page 10

Instructions For Use
10.
4. Plug the power plug into the power supply. Turn on the
shampooer by pressing the On/Off Button located on the
base of the shampooer.
IMPORTANT! Ensure that the power cord is secured into the
Cable Hock, as shown.
5. Step onto the Handle Release Pedal to put the shampooer into
the cleaning position. While depressing the handle spray trigger,
push the shampooer in a forward motion. Release the trigger and
pull the shampooer backwards to collect the dirty water.
Note: For best cleaning results, use the shampooer to clean
over recently cleaned surfaces without depressing the handle
spray trigger. Use a steady, moderate, forward and backward
motion. Always work from back to front across the room to
avoid stepping on wet carpet and lowering the carpet pile.
(continued)