Installation - Roland XT-640 Product Manual

12. Installation


Installation
1
Unpacking
2
Printer installation
3
Ink system installation
Initial ink filling
4
* The pump does not rotate for 20 minutes in order to let ink flow into sub tanks by its own gravity.
Take-up unit (TUC-3) installation
5
* Check which setting a user takes beforehand, INWARD or OUTWARD.
Bidirectional adjustment
6
Perform this adjustment using the media the user uses.
7
Feed adjuster adjustment
8
RIP software installation
Explanations about how to operate the
9
machine and how to use RIP software
*This is for reference only. The amount of time required for each procedure may vary depending on the installation environment.
Referential time: 20 min.
Referential time: 30 min.
Referential time: 25 min.
Referential time: 50 min.
Referential time: 15 min.
Referential time: 5 min.
Referential time: 30 min.
Referential time: 15 min.
Referential time: Depends on the user's request
Accumulated time: 20 min.
Accumulated time: 50 min.
Accumulated time: 75 min.
Accumulated time: 125 min.
Accumulated time: 140 min.
Accumulated time: 145 min.
Accumulated time: 175 min.
Accumulated time: 190 min.
45/47