Additional Information; Troubleshooting - VTech 2338 User Manual

Troubleshooting

If you have difficulty operating your phone, the suggestions below should solve the problem. If you still have difficulty after
trying these suggestions, call VTech Communications at 1-800-595-9511 . In Canada, call VTech Telecommunications
Canada Ltd . at 1-800-267-7377 .
Problem Suggestion
My phone doesn't • Make sure the power adaptor is plugged in .
work at all .
• Make sure the telephone line cord is plugged firmly into the base unit and the telephone wall
jack .
• Disconnect the power adaptor for a few minutes, and then reconnect it .
• Charge the battery in the handset for 16 hours . For optimum daily performance, return the
handset to its base when not in use .
• Reset the base . Unplug the unit's electrical power . Wait for 15 seconds then plug it back in .
Allow up to one minute for the handset and base to reset .
• You may need to purchase a new battery, please refer to the battery sections in this user's
manual .
I cannot get a dial • Try all the suggestions above .
tone .
• Move the handset closer to the base . You might have moved out of range .
• Your line cord might be malfunctioning . Try installing a new line cord .
• If the previous suggestions do not work, disconnect the base unit from the telephone jack and
connect a different phone . If there is no dial tone on that phone either, the problem is in the
wiring or local service . Contact your local telephone company .
www.vtechphones.com
29