John Lewis Fawley Headboard Step By Step Assembly Instructions

Double and king size

JOHN LEWIS FAWLEY HEADBOARD

Double and King Size

Step By Step Assembly Instructions

PRE-ASSEMBLY PREPARATION

Please check the pack contents before attempting to assemble this product. A full checklist of

components is given in this leaflet. If any components are missing, please contact your nearest

stockist.

This product takes approximately 10 MINUTES to assemble with 2 People.

The fittings pack contains SMALL ITEMS which should be KEPT AWAY FROM YOUNG

CHILDREN.

Read this leaflet in full before commencing assembly.

Always lift the unit from the base when moving it, do not drag along the ground. It is

recommended that two people should move the unit. Never move it alone.

Table of Contents

Do you have a question about the Fawley Headboard and is the answer not in the manual?

Page 1 JOHN LEWIS FAWLEY HEADBOARD Double and King Size Step By Step Assembly Instructions PRE-ASSEMBLY PREPARATION Please check the pack contents before attempting to assemble this product. A full checklist of components is given in this leaflet. If any components are missing, please contact your nearest stockist.
Page 2 Place the wooded struts over the corresponding holes in the headboard, insert Screw M6 x 30mm (A) into the Spring Washer M6 (B) and screw into place using Allen Key (C). The headboard can now be attached to the Divan with the large headed screws sup- plied by your bed manufacturer.
Page 3 Care and Maintenance This Fawley Headboard should be cleaned using a soft damp cloth and dried immediately. Do not use a very wet cloth or allow any liquid contact for a long period of time as this can permanently damage the surface.