Optional Headset Installation & Operation Instructions; Belt Clip - VTech VT 9162 Instructions Manual

Vtech handset instructions

Table of Contents

OPTIONAL HEADSET INSTALLATION & OPERATING INSTRUCTIONS

Your VT 9162 cordless telephone is equipped with a 2.5mm Headset Jack for use with an

optional accessory Headset for hands-free operation.

OPERATION

NOTE: Whenever a compatible Headset is connected to the cordless Handset, the microphone

on the Handset will be MUTED. This is done to limit the effect of background noise.

* Many compatible Headsets have a monaural design which is reversible, so you can wear your

Headset on either the left or right ear, leaving one ear free for room conversation.

If you choose to use the Headset option, you must do the

following:

INSTALLATION

Obtain an optional accessory Head set, which is compat-

ible with the VT 9162 .

Please contact VTECH Communications Customer Ser-

vice, in the U.S. toll-free at 1-800-595-9511, in Canada

call 1-800-267-7377 for dealer information in your local

area. You can also purchase a compatible Headset di-

rectly from VTECH Communications Customer Service.

Once you have a compatible 2.5mm Headset, locate the

Headset Jack on the Handset of your VT 9162 . Connect

the plug on the Headset to the jack on the cordless Hand-

set. The plug should fit securely. Do not force the con-

nection. See illustration.

The VT 9162 is also equipped with a detachable belt clip.

Align the pins on the inside edge of the belt clip with the

notches on the side of the VT 9162 Handset. The belt

clip should snap securely into place. Do not force the

connection. See Illustration.

Table of Contents