Ford Escape Owner's Manual page 26

KEYCODE SECURITY
Units incorporate a unique
Keycode security number that must
be entered before the unit will
operate. Normally, the Ford Dealer
does this during the pre-delivery
inspection.
If the battery is disconnected for
any reason, or the audio unit is
removed from the vehicle, the
Keycode must be re-entered before
the unit will work again.
Recording the Keycode
When you take delivery of your vehicle, the Keycode should be noted on
the Keycode card in the front of this Audio Guide. Detach the card and
keep it in a safe place, but not inside your vehicle. If you lose the
Keycode, contact your dealer and supply details of your audio unit along
with some proof of identity. Your Dealer will then obtain the correct code
from Ford Motor Company Limited.
To enter a Keycode
If 'CODE - - - -' flashes in the display
when you switch on the audio unit,
you must enter the Keycode using
the station preset buttons.
1. Press button 1 repeatedly until
the first digit of your Keycode is
shown in the display.
2. Press preset buttons 2, 3 and 4 in
the same way for remaining three
digits.
3. Ensure the complete Keycode is
correct before pressing preset
button 5 to confirm it.
Audio
5 6
25