View Memory; Clear Memory; Check Battery Charge (Chk Batt Chrg); Technical Support - Fike 10-2983 Product Manual

Output analyzer

Table of Contents

Press and release the ENTER button to repeat the test, or press and release the SELECT and ENTER buttons at

the same time to return to the main menu.

Power down and remove the tester.

End of testing. Place system back into normal operational state.

11.0 VIEW MEMORY

This menu option displays test results from the previous test —whether on an EPC, IRM, or ARM— until you run a

new test. This feature will store test results and allow you to recover them, should the Analyzer accidentally power

down or if the active test ends before results are recorded.

This menu option allows you to clear any results stored in memory, and is especially useful when storing data is

against company policy.

This menu option displays the current battery charge at any point before, during, or after testing. This option

provides an approximation of the charge level and is intended as a reference only. As with any battery-operated

device, the battery in the Output Analyzer should be charged periodically using a typical USB-C 5Vdc connection.

Ensure the voltage rating of the connection is 5Vdc maximum or you could damage the device. Once the device is

fully charged, do not leave the unit connected to the battery charger or you will reduce battery life.

To ensure this device remains compliant with EMC directive 2014/30/EU, the unit shall not be used while charging

the battery and the battery charger used for charging this device shall be compliant with the requirements of

EN61326-1.

We are confident in the quality and construction of the Fike Output Analyzer, but if you should ever have a problem

or question, please feel free to contact us at:

We also worked hard to prepare a manual that is easy to follow and understand. However, you, the customer, are

going to be our best source for how well this manual actually works. If you have any comments or suggestions on

how we can improve this manual, please let us know! Contact us at feedback.manuals@fike.com.

PAGE / 16

Telephone:

Main: 1-816-229-3405

Toll Free (US Only):

1-800-YES-FIKE (+1-800-937-3453)

Website:

www.fike.com

Doc. P/N 06-905

Rev. 1 / December 2018

Table of Contents