Zte CDMA2000 1X EV-DO User Manual page 21

6、Please insert the Data Terminal into USB interface if the system prompts you to insert the
hardware (If it has been inserted, please unplug it and insert again.)
7、The system shall find the new hardware and install the driver automatically. Just wait a minute.
(Please ignore the prompt during the installation, such as "USB device not recognized" or "Your
hardware might not be able to work normally because there is an error during the hardware
installation.")
ZTE Corporation
CDMA2000 1X EV-DO Wireless Data Terminal User Guide
http://www.zte.com.cn