Philips Lifeline User Manual page 49

Phone Base and Handset
You should keep your equipment free of dust by occasionally wiping it
with a soft cotton cloth. If additional cleaning is required, you should first
turn off the power and then disconnect the cords from the wall. This will
prevent false button presses and possible damage to the equipment.
1. Slide the power switch to the OFF position and unplug the power
cord from the electrical outlet. Unplug the telephone cord from the
wall jack.
2. Slightly dampen a soft cloth with a mild all-purpose cleaner and gently
wipe the surfaces clean. Never use detergents, excess water, treated
cloths or sprays. Do not spray or pour any cleaner directly onto the
equipment, as excessive moisture will damage it. Do not use aerosols
on or near the phone base.
3. Reconnect the power cord to the electrical outlet, reconnect the
telephone cord to the wall jack, and then turn the power switch
back to ON.
4. Test your system by pressing your Lifeline Help Button. Tell the
Personal Response Associate that you are just testing your equipment
after cleaning.
Remember to turn the power OFF and disconnect all cords before cleaning.
?
Do not spray cleaners directly onto equipment because moisture could get
?
inside and cause damage.
43