Philips Lifeline User Manual page 68

ACTA (Administration Council for Terminal Attachments)
Information
This equipment complies with Part 68 of the FCC rules and the requirements
adopted by the ACTA. On the bottom of this equipment is a label that
contains, among other information, a product identifier in the format
US: AAAEQ##TXXXX. If requested, this number must be provided to
the telephone company.
A plug and jack used to connect this equipment to the premises' wiring and
telephone network must comply with the applicable FCC Part 68 rules and
requirements adopted by the ACTA. A compliant telephone cord and modular
plug is provided with this product. It is designed to be connected to a
compatible modular jack that is also compliant. See installation instructions
for details.
If your home has specially wired alarm equipment connected to the telephone
line, ensure that the installation of the Lifeline Cordless Phone does not disable
your alarm equipment. If you have questions about what will disable alarm
equipment, consult your telephone company or a qualified installer.
Caution: In order for "alarm dialing equipment" to be able to seize the
phone line to report an alarm or other event when other customer equipment
(telephone, answering system, computer modem, etc.) connected to the same
line is in use, "alarm dialing equipment" must be connected to a properly
installed RJ31X jack. The RJ31X jack must be connected in series with,
and ahead of, all other equipment attached to the same phone line. Series
installation of an RJ31X jack is depicted in the figure on the following page. If
you have any questions concerning these instructions, you should consult your
telephone company or a qualified installer about installing the necessary jack and
"alarm dialing equipment" for you.
Regulatory Compliance
62