Connection - KoamTac KDC300 User Manual

4.1 Connection

The KoamTac KDC300 connects to com port automatically once it is connected to PC USB port. User can
also manually assign the KTSync com port to the KDC300 com port using Connection submenu under
File menu if needed..
KDC300 com port can be found in the Windows Device Manager.
The KTSync program will not connect to KDC300 if KDC300 is in Menu mode.
If KTSync program fails to connect automatically to KDC300
−
Exit KTSync program
−
Ensure KDC300 is properly connected to the PC by one of the USB ports and that it is
not in menu mode
−
Start KTSync program once again.
KDC300 User Manual
29