Remove The Terminal From The Arm Mount Sled - Honeywell 26079 User Manual

Remove the Terminal from the Arm Mount Sled

1. If the audio end cap is used, remove the audio cable. To prevent damage to the terminal always
unplug the audio cable (if used) before removing the end cap.
2. Slide the lock down to release the end cap.
3. Push up on the right side of the end cap. Do not attempt to remove the end cap without opening
the lock first!
4. Pull the end cap off of the sled.
5. Slide the terminal out of the sled. Use the notch in the bottom of the sled to push
the terminal.
3 - 4