Yamaha Tyros3 Service Manual page 114

Tyros3
SYSTEM RESET
There are two reset methods in the SYSTEM RESET display: Factory Reset and Custom Reset.
Factory Reset
(see below)
Factory Reset–Restoring the Factory Programmed Settings
This function lets you restore the status of the Tyros3 to the original factory settings.
1
Select the desired item to be restored by using [1pq]–[3pq] buttons and add a checkmark to it by pressing
the [4 p] (MARK ON) button.
To remove the checkmark, press the [4q] (MARK OFF) button.
SYSTEM SETUP
MIDI SETUP
USER EFFECT
MUSIC FINDER
FILES & FOLDERS
REGIST
EXPANSION VOICE
2
Press the [D] (FACTORY RESET) button to execute the Factory Reset operation for all checkmarked items.
114
Restores the System Setup parameters to the original factory settings. Refer to the Data List for details
about which parameters belong to the System Setup.
Restores the MIDI settings including the MIDI templates on the USER tab display to the original
factory status.
Restores the User Effect settings including the user effect types, user master EQ types, user
compressor types, and user vocal harmony types created via the Mixing Console display to the
original factory settings.
Restores the Music Finder data (all records) to the original factory settings.
Deletes all fi les and folders stored in the USER tab display.
Temporarily deletes the current Registration Memory settings of the selected Bank. The same can
be done also by turning the [POWER] button ON while holding the B5 key (rightmost B key on the
keyboard).
Deletes all Expansion Voices.
Custom Reset
(see page 126)