HEADRUSH Looperboard Quick Start Manual page 8

Recording & Playing Tracks
The HeadRush Looperboard lets you record audio onto four tracks and store each set of four tracks
as a loop. Each track can have up to 99 layers. Each track can be a minimum of 1 second long, and
each track has no maximum length limit. You can record, play, and stop tracks independently of each
other depending on the loop mode and other settings.
Each track's info box, meter, and/or waveform will use a color to indicate its current state:
•
Red: recording or overdubbing
•
Green: playing
•
Blue: stopped
Use the Timeline page to view the waveforms of each track's recorded audio in your loop.
To show the Timeline page, tap the Navigation Menu icon at the top left of the touchscreen,
then tap the Timeline icon.
Use the Mixer page to adjust the volume levels and panning of each track.
To show the Mixer page, tap the Navigation Menu icon at the top left of the touchscreen, then
tap the Mixer icon.
To adjust the volume level of a track, tap and drag the white line at the top of a meter.
To adjust the volume of the main outputs, turn the Main knob.
The left time counter in the bottom bar of the Timeline and Mixer pages indicates the current playback
position of the loop. The right time counter in the bottom bar indicates the length of the longest track
in the loop. Both are displayed as hours:minutes:seconds.centiseconds.
Tip: You can tap the Function footswitch twice to quickly return to the Timeline page from any other
HeadRush Looperboard page.
8