Setup; Loose Parts - Toro TURBO FORCE Operator's Manual

Setup

Note: Determine the left and right sides of the machine from the normal operating position.

Loose Parts

Note: Use the chart below to verify all parts have been shipped.
Important This kit and bagger will require significant time to install the first time. A right angle drill is recommended
for installation.
Step Description
1
No parts needed
2
No parts needed
3
Anti-scalp roller bracket
Tapping screw, 3/8 x 1 inch
Mounting plate
4
Bolt, 3/8 x 1-1/4 inch
Flange nuts, 3/8 inch
5
Pulley assembly
6
No parts needed
Bagger mounting bracket
Left side bagger bracket
7
Right side bagger bracket
Bolt, 3/8 x 1 inch
Flange nut, 3/8 inch
Belleville washer, 3/8 inch
Hood assembly
8
Bag
Clevis pin
Hairpin cotter
9
Blower assembly
Blower belt cover
10
Bagger Belt
Idler spring
Pulley cover
Qty. Use
Removing the existing mower cover
Removing the anti-scalp roller and
bracket
1
Installing the anti-scalp roller and
bracket
1
1
2 Installing the mounting plate
2
1 Installing the pulley assembly
Removing the drive wheels and bumper
guard
1
1
1
Installing the bagger brackets
10
10
8
1
2
Installing the hood assembly and bags
2
2
1 Installing the blower assembly
1
1
Installing the bagger belt and idler
spring
1
1
5