Sharp ER-3100 Installation Manual page 44

Note:
For
data C and D never enter any digits other than those
shown in Tables 15 and 16.
Data A and B do not need to be changed. Enter the same
data as data A and B of job number 901 shown in the
SRV-mode program list priilted by job number 900 before
installingthe option.
When you need to change data A to O, any leading zeros
need not be entered.
Example 1: If data A, B, C, and D are O, 4, 1, and 2,
enter like this: E+ B + E=
Example 2: If data A, B, C and D are O, 0, 1, and 2,
enter like this: E"D
.
2. PGM-mode PLU programming
This programming is described in the InstructionManual. If yOU
are asked to perform this programming,however, perform it
according to customer'srequirements.
The PLU programming consists of the following three jobs:
(1) Programmingof unit prices -- job number 20
X=o
xxxxxx~"
m—
For automatic
incrementof
PLU code
Zzz:
PLU code
Xxxxxx: Unit price; enter a maximum of six digits. (The
denominationsused for unit price entry is in
cents.) If the unit price is $6.00, for example,
enter "600".
(2) Programmingof departments to be associatedwith PLUS -- job
number 22
i.
–40–