Sharp ER-3100 Installation Manual page 31

b. Print
The contents of the programmingare printed on the
receipt/journalpaper. The print format is shown below.
The logo and date printed are the same as those printed on
the receipt.
(5)
a.
12345678gol 2345678gol
#0293
MODEM
CONNECTION
YES
PROCEDURE
NO
DR
SENSE
YES
Cs S"ENS E
YES
ER–
OFF
TIME
/10s
0
'l~slt
and ?lNoIl
showthe contents
of theprogramming.
Programming of the terminal numbers of slaves that are
connected to the master through modems.
When slaves are connected to the master through modems and
the master is an ER-3100, the terminal numbers of those
slaves to which the ER-OFF command is to be sent
automaticallyneed to be listed in the master by this
programming.
Programmingprocedure
Perform this programming in the PGM mode by using the
following procedure.
To set the terminal no.
t. UOOII
.=.
294~~~
X
—
–27–