Adjusting The Angle Of The Control Panel - Canon imageRUNNER ADVANCE C350iF Starter Manual

Control Panel Parts and Functions
1
[Main Menu]
Press to display the Main Menu screen. If the Main
Menu screen is not displayed when using a function,
it is necessary to press [Main Menu] before using the
function.
2
Touch Panel Display
The settings screen for each function is shown on this
display. Six function keys are displayed by default.
3
Settings/Registration key
Press to specify settings/registration.
4
Energy Saver key
Press to set or cancel the Sleep mode. Lights when the
machine enters the Sleep mode. For more information
on the Auto Sleep mode, see "Main Power and Energy
Saver Key, " on p.34.
5
Numeric keys
Press to enter numerical values.
6
Clear key
Press to clear entered values or characters.
7
ID (Log In/Out) key
Press to log in/out when a login service such as
Department ID Management or SSO-H has been set.
8
Stop key
Press to stop a job in progress, such as a scan, copy, or
fax (scanning only) job.
9
Start key
Press to start an operation.
10
Main Power Indicator
Lights when the main power is turned On.
11
Error Indicator
Flashes or lights if there is an error in the machine.
When the Error indicator flashes, follow the instructions
that appear on the touch panel display. When the Error
indicator maintains a steady red light, contact your local
authorized Canon dealer.
12
Processing/Data Indicator
Flashes or blinks green when the machine is performing
operations, and maintains a steady green light when fax
data is stored in memory.
13
Reset key
Press to restore the standard settings of the machine.
14
Edit Pen
Use when operating the touch panel display, such as to
enter characters.
15
[Status Monitor/Cancel]
Press to check the status of jobs or to cancel print jobs.
Also, you can check the status of the machine such as
the amount of paper remaining in the paper source.
16
[Quick Menu]
Press to display functions registered in the Quick Menu.
17
Brightness Adjustment Dial
Use to adjust the brightness of the touch panel display.
18
Volume Settings key
Press to display the screen for adjusting settings, such
as the transmission volume and fax sending/receiving
alarm volume.
19
Counter Check key
Press to display the copy and print count totals on the
touch panel display.

Adjusting the Angle of the Control Panel

The angle of the control panel is adjustable as shown
below.
IMPORTANT
Do not apply excess force to the control panel when
adjusting its angle.
Parts and Their Functions
33