Canon imageRUNNER ADVANCE C350iF Starter Manual page 27

10
Registering the Unit Name
The unit's name appears on the receiving party's fax
machine, or is printed on the received document as
the Sender Name. You can register the name of your
company or department as the unit name.
1. Press [Set] → enter the unit name → press [Next].
11
Setting the Line Type
You can set the phone line type to use for sending.
1. Select the line type → press [OK].
12
Specifying the System Manager
Information Settings
You can register the System Manager Information
settings.
1. Change the authentication information → press
[Next] → enter information if necessary → press [OK].
▼
IMPORTANT
The default setting for both the System Manager ID
and System PIN is '7654321' . Make sure to change
these settings.
Configuring the Machine (Setup Guide)
25