Thermostat Control Screen; Temperature Display; Setpoint Display; Clock Display - Trane Z WAVE TZEMT400AB32MAA User Manual

Thermostat Control Screen

The main Thermostat Control Screen is the default display screen and is the screen that is normally displayed on the
Thermostat.

Temperature Display

The Thermostat will display the current temperature from the internal temperature sensor.

Setpoint Display

The heating and cooling setpoints are displayed next to the Setpoint Up/Down buttons. In the HEAT mode, the Up/Down
buttons change the heat setpoint. In the COOL mode, they change the cooling setpoint. When in AUTO mode, the buttons
change the last call's heating or cooling setpoint. Note that the setpoints will "push" each other if they are adjusted to get
within the minimum Heat/Cool separation setting. This is normally 3 degrees.

Clock Display

The current time is displayed in the upper left corner of the main screen. Set the clock from the User Settings Menu.
The time will blink when the clock has not been set.
10:25 AM
Sys Off
72
Run
Filter
MODE
MENU FAN
77 H
74 C
RUN
7