Emerson Numatics DeviceLogix G2-2 Series Quick Start Manual page 12

12) Stand-Alone Versus Networked Functionality
The Numatics DeviceLogix communication node can be used as a stand-alone programmable device or as
part of a DeviceNet network. Using the RSNetworx
enabled or disabled to configure these options.
Stand-Alone Settings
To configure your Numatics DeviceLogix manifold to function as a stand-alone node, enable both the
"Network Status Override" and "Comm. Status Override"
G2-2 Series DeviceLogix Quick Start Manual
3835054 TDG22DLQS3-0
Subject to change without notice
www.numatics.com/fieldbus
for DeviceNet software, different settings must be
TM
.
Enabled
Enabled
9 Bytes
8 Bytes
239-1290 / 1291
4 Bytes
4 Bytes
239-1384: Rx – 0, Tx – 0
239-1315: Rx – 1, Tx – 1
239-1319: Rx – 1, Tx – 2
239-1304: Rx – 1, Tx – 0
239-1308: Rx – 1, Tx – 0
No Default
Enabled
Enabled
1/07
Page 12