Default Setting Table; Audio Input Settings; Audio Output Settings; Event Settings - Toa A-9120DH Operating Instructions Manual

13.1. Default Setting Table

13.1.1. Audio input settings

Setting Item
Priority
Ducker
Input Channel Name
[Settings when the ZP-001T is used]
Pre-paging Tone
Output Format
Operation Mode
[Settings when the D-001T is used]
Input Sensitivity
Phantom Power
VOX Function

13.1.2. Audio output settings

Setting Item
Output Channel Name

13.1.3. Event settings

Setting Item
Event Number
Event Classification
[When Event classification is set to ROUTE]
Input Channel
Output Channel
Trigger
Interlock Output Control
Interlock Output
[When Event classification is set to BGMEND]
Trigger
[When Event classification is set to BASE]
Event Number
Trigger
8 (7 only when ZP-001T is used)
OFF
(IN1 – 8)
OFF
OUTPUT SELECT
PAGING PORT
–10 dB
OFF
OFF
(OUT1 – 8)
01
NONE
01
OUT1
NONE
OFF
COUT01 (When the interlock output control is ON)
C-IN01
01
C-IN01
Default
Default
Default
63