Default Setting Table; Input Settings; Audio Output Settings; Event Settings - Toa A-9060DH Installation And Operating Instructions Manual

14.1. Default Setting Table

14.1.1. Input settings

Setting Item
Input Channel Name
[Settings when the 900 series module is used]
Trigger*
1
Zone 1 – 4 *
1
[Settings when the D-001T is used]
Input Sensitivity
Phantom Power
VOX Function* 2
Trigger* 1
Zone 1 – 4 *
1
[Settings when the ZP-001T is used]
Pre-paging Tone
Operation Mode
[Settings when the AN-001T is used]
ANC Operation ON/OFF
Input Sensitivity
Phantom Power
ANC-Activated Output
Monitor ON/OFF
Monitor Output Channel
[Settings when the AN-001T is not used]
Priority
Ducker
* Only in the 1-channel or 2-channel output operation
1
* Only in the normal matrix operation
2

14.1.2. Audio output settings

Setting Item
Output Channel Name

14.1.3. Event settings

Setting Item
Event Number
Event Classification
(IN1 – 8)
NONE
OFF
–10 dB
OFF
OFF
NONE
OFF
OFF
PAGING PORT
BYPASS
–10 dB
OFF
OUT1
OFF
OUT1 (When the monitor ON/OFF setting is ON)
8 (7 only when ZP-001T is used)
OFF
(OUT1 – 8)
01
NONE
Default
Default
Default
84