Advertisement
Step 6 Attach paper bag
1-18
Align opening in paper bag with dirt
tube (S) inside bag compartment.
1-21
Pull switch lock (U) above ON/OFF
switch (V) straight out.
Dispose of lock.
Note: If lock has come off during
assembly make sure switch is in
the OFF position (down) before
plugging cord into electrical
outlet.
1-24
X
Y
Open tool cover.
Position dusting brush (X),
furniture nozzle (Y), and crevice
tool (Z), into tool storage area
as shown.
6
1-19
S
Push paper bag firmly onto tube.
Tuck top and bottom of paper bag
into bag compart m e n t .
Step 7 Position tools
U
1-22
V
Raise handle to upright position.
Bring hose toward front of cleaner
and stretch hose over hose rack.
Push opposite hose end firmly into
rear "cup" in rack.
Note: Hose end must be firmly
connected to tool rack when
cleaning floors.
1-25
Z
AA
BB
The extra belt (AA) and one extra
paper bag (BB) can be stored on
the back of the cleaner handle as
shown.
1-20
To replace bag door, insert the 2 tabs
on bottom of bag door into the 2 slots
on bag compartment.
Make sure all edges of paper bag
are completely inside the bag
c o m p a rt m e n t .
Close door.
1-23
Position wand,with smaller diameter
end down, at side of cleaner as
shown.
CAUTION:When cleaner is turned
on, the agitator will continue to
rotate when cleaner handle is in
upright position. Avoid tipping
cleaner or setting it on furniture,
fringed area rugs, or carpeted
stairs during tool use.
Fill out and return the product
registration card included with
your cleaner.
Advertisement
