Table of Contents
Advertisement
2.3.2 Using Your Antenna or Cable for TV
2.3.3 Using the Antenna or Cable through your VCR
Note: If you have an off-air antenna or cable TV, connect
it to the "Antenna In" connector on the rear of your VCR.
Version 4/17/2007
1.
Turn off the power to the Plasma TV.
2.
Connect the coaxial (RF) connector from your antenna or cable
to the DTV/TV CABLE/ANTENNA connector at the rear of the
Plasma TV
3.
Turn on the power to the Plasma TV.
4.
Select TV using the INPUT button on the remote or side of the
Plasma TV, or directly by pressing the TV button on the
Remote Control.
1.
Turn off the power to the Plasma TV and VCR.
2.
Connect the "Output to TV", "RF Out" or "Antenna Out"
connector on the rear of your VCR to the DTV/TV
CABLE/ANTENNA connector at the rear of the Plasma TV.
3.
Turn on the power to the Plasma TV and VCR.
4.
Select TV using the INPUT button on the remote or side of the
Plasma TV, or directly by pressing the TV button on the
Remote Control.
19
www.VIZIOCE.com
VIZIO VP50HDTV User Manual
Advertisement
Table of Contents
