Connecting Coaxial (Rf); Using Your Antenna Or Cable Tv; Using The Antenna Through Your Vcr - Vizio L13e User Manual

13” lcd tv

Table of Contents

2.4 - Connecting Coaxial (RF)

There are several options for connecting your antenna or cable to your new L13e LCD TV -

directly to the TV or through your VCR. Based on your home theater configuration, you can

decide which option is the right one for you.

Installation:

1. Turn off the power to the LCD TV.

2. Connect the coaxial (RF) connector from your antenna or cable

box to the TV connector on the rear of your LCD TV.

3. Turn on the power to the LCD TV

4. Select TV using the Input button on the remote control.

Note:

a) Make sure the antenna or cable TV is correctly grounded.

b) See page 19-20 for selecting the TV source within the OSD menus (standard

cable, HRC cable, IRC cable, air (antenna)).

Installation:

1. Turn off the power to the LCD TV and VCR.

2. Connect the "Output to TV" (RF Out or Antenna Out) connector on the

rear of your VCR to the TV connector on the rear of your LCD TV.

3. Turn on the power to the LCD TV and VCR.

4. Select TV using the Input button on the remote control.

5. Select Channel 3 or 4 to match the channel selected on the rear of your VCR.

Note:

a) If you have an off-air antenna or cable TV, connect the off-air antenna or TV cable to

the RF connector on the rear of your VCR.

b) Make sure the antenna or cable TV is correctly grounded.

Version - 9/23/2004

Table of Contents