Vizio VP50HDTV User Manual page 35

Manual Scan – If you feel that not all of the
available digital TV channels were found with Auto
Scan, then selecting this option enables the TV to
scan again to try to find any missing channels.
Press the button to highlight Manual Scan and
then press the OK button.
Note: A channel will be missed if it is not
transmitting at the time of the scan and so you
should try again at a time when you know the
station is transmitting programs.
A channel will also be missed if it is too weak to be
received. Re-orientation of the antenna or
changing to a higher gain antenna may help, but
note that any changes to the antenna may affect
other channels.
The Manual Scan screen now appears and this
can be used in two ways. The screen defaults to
Add-On Mode and pressing the OK button at this
stage makes the TV scan the whole channel range
again. Press EXIT to navigate away from this
screen.
Note: If the OK button is pressed, then the
automatic scanning will start again.
If the or button is pressed first, then the
Range Mode is activated so that you can specify a
smaller range of channels to be scanned again.
Press the button to highlight From Channel and
enter the channel using the number buttons, then
press the button again to highlight To Channel
and enter the channel using the number buttons.
Press EXIT to navigate away from this screen.
Version 4/17/2007 35
www.VIZIOCE.com
VIZIO VP50HDTV User Manual